Marine diesel heater 5KW 12V liquid parking heater with water pump outside

1. Range of Application

The heater has the qualities of high thermal power and efficiency. It can apply for preheating

the autos at a low temperature and eliminating the frost of the trucks, engineering autos and

special vehicle.

2.Product Advantages

Preheating the engine and the car without staring engine.

Avoiding wear of the engine caused by start at low temperature.

Resolving the trouble of defrosting and snow scrapping.

Easy install based on small and smart structure, can be removed to a new car.

90% of fuel saved when the heater is started.

3. Technical Specification

4. Production

5. Working pricple

The cooling liquid of engine flows through water inlet pipe 19, the furnace cavity between

the furnace inner casing 3 and outer casing 2, and water outlet pipe 18, forming a complete

loop for the cooling liquid circulation system. The circulation is forced by water pump 13. In

this way, the cooling liquid of engine can be heated again and again in the furnace and the

temperature of engine, water-tank, heat-exchanger and cab can rise gradually.

The car should be started first for circulating the coolant after installation.Switch the A/C to

warm blower mode,the bubbles can be eliminated after the warm air blows.

1.Combustion supporting fan 2.Furnace outer casing 3.Furnace inner casing

4.Combustor 5.Glow plug 6.Flame sensor 7.Water temperature sensor

8.Overheat sensor 9.Controller 10.Air inlet pipe 11.Muffler 12.Fuel pipe

connector 13.Water pump 14.Fuse 15.Main wire harness connector 16.Fuel pump

17.Exhasut pipe 18.Water outlet pipe 19.Water inlet pipe 20.Burner